A.S.A.P. Products Index

Request Information

SS2-25 click to enlarge

SS2-25

Is a low profile backgauge that can be retrofit and used on both upstroking
and down stroking smaller brakes requiring a 72” or shorter gauge bar.
You also can order it set up for use as a front gauging system
A.S.A.P. backgauges make it possible to upgrade your existing machines to produce parts more accurately and at faster production rates.

SPECIFICATIONS:

GAUGE ARM: Machined steel weldment, provides Rigidity and Precision. This arm fully covers the drive screw and linear guidance system for long life under extreme conditions. Our standard travel range is 25”, optionally up to 60”.
CARRIAGE: Machined ALUMINUM CASTING, all other parts are machined from solid bars.
GUIDANCE: Hardened steel precision VEE WAYS with ball bearing ROLLER VEE WHEELS give smooth linear travel with zero deflection and need the least amount of maintenance.
DRIVE SYSTEM: CNC controlled units utilize a single DC closed loop servo motor driving a ball bearing supported drive screw. With provisions for manual rear / front hand wheel operation optionally.
ADJUSTMENT: Manual 10” horizontal, 10” vertical travel with individual hand wheels for height adjustment. The vertical slides and gauge bar assembly are easily removed. Range extension bars can be added to work beyond the 25” range.
GAUGE BAR: A 60” Machined steel angle with 2 flip stop fingers is standard, other gauge bars are optionally available. Two machined steel “Zero reference” set up blocks are provided to adjust the gauge bar to the center of the punch.
HOLDING POWER: Tested @ 400 #
REPEATABILITY: Positioning accuracy within .002 inch ( CNC units )
SCALES: 1/32” graduations for use manually
DRIVE SPEED: To 300 IPM ( CNC units )
INCLUDES: Mounting hardware, installation and operation instructions

SHIPPING WEIGHT: Approx. 280 # crated

June 1 2000 List Prices

SS2-25-M
SS2-25-M4.....................
SS2-25-MX99................
SS2-25-MX99/2RDM
SS2-25-MX99/2RDS
SS2-25-MX99/3RDM
SS2-25-MX99/3RDS

Manual Gauge 25” range
CNC Single Axis One program 5 bends................................................*stock item...
CNC Single Axis 255 jobs, “unlimited” moves,......................................*stock item...
CNC Two Axis 255 jobs, “unlimited” moves, for fully hydraulic brakes
CNC Two Axis 255 jobs, “unlimited” moves, for hydraulic w/servo depth stops
CNC Three Axis 255 jobs, “unlimited” moves, for fully hydraulic brakes
CNC Three Axis 255 jobs, “unlimited” moves, for hydraulic w/servo depth stops

$ 2500.00
$ 5400.00
$ 7000.00
$ 9100.00
$ P.O.R.
$ P.O.R.
$ P.O.R.

“Show “ special prices

A.S.A.P.

AUTOMATION SOLUTIONS AND PRODUCTS

TEC-LINE MFG. CORP.
5295 US Hyw. 41
Oconto WI. 54153
888-832-7847